 |
| MBD-X8ST3-F -O |
- X8ST3-F (Standard Retail Pack)
|
| MBD-X8ST3-F -B |
|
| |
|
| Form Factor |
|
| Dimensions |
- 12" x 10" (30.5cm x 25.4cm)
|
| |
|
| CPU |
- LGA 1366 Socket
- Intel® Core™ i7 990X, i7-980X, i7-975 and i7-965 Extreme Edition
- Intel® Core™ i7 series
- Intel® Xeon® 5600/5500 series
- Intel® Xeon® 3600/3500 series
|
| System Bus |
|
| |
|
| Memory Capacity |
- Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC / non-ECC Un-Buffered memory
- Three Channel memory bus
- 6 DIMM sockets
|
| Memory Type |
- 1333 / 1066 / 800MHz Un- Buffered ECC / non-ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256MB, 512MB, 1GB, 2GB, 4GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
| |
|
| Chipset |
- Intel® X58 Express chipset
- ICH10R
|
| SAS |
- LSI SAS1068E
- RAID 0, 1, 10 support
- (Optional: AOC-IButton68) RAID 5 support
|
| SATA |
- Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support (Windows)
- RAID 0, 1, 10 support (Linux)
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Winbond® WPCM450 BMC
|
| Network Controllers |
- 2x Intel® 82574L Gigabit Ethernet Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| VGA |
|
| Super I/O |
|
| Clock Generator |
|
| |
|
| SAS |
|
| Serial ATA |
- 6 SATA ports
- 6 SATA hard drives supported
|
| Floppy |
- 1 Floppy controller; 1.44 MB
|
| LAN |
- 2x RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
- 2x USB rear ports
- 2x USB on-board
- 2x USB internal headers (4 ports)
- Total 8 USB 2.0 Compliant
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Port / Header |
- 1x Fast UART 16550 serial port
- 1x internal header
|
| |
|
• Please see this board's I/O Panel |
| |
|
• Please see our OS Compatibility Chart |
|
 |
|
|
| 2U Chassis |
- CSE-213A-R900LPB
- CSE-216A-R900LPB
- CSE-216E1-R900LPB
- CSE-216E2-R900LPB
- CSE-822T-400LPB
- CSE-825MTQ-R700LPB
- CSE-825TQ-560LPB
- CSE-825TQ-R700LPB
- CSE-826TQ-R800LPB
|
| Important Chassis Notes |
- To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details.
|
| |
|
| PCI-Express |
- 3 (x8) PCI-e 2.0 slots (1 using x16 slot)
- 1 (x4) PCI-e slot (using x8 slot)
|
| PCI |
|
| |
|
| BIOS Type |
- 32Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
| |
|
| Software |
- IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
- SuperDoctor® III
- Watch Dog
- NMI
|
| Power Configurations |
- ACPI / ACPM Power Management
- Main Switch Override Mechanism
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from Soft-Off
- Power-on mode for AC power recovery
- Internal/External modem ring-on
|
| |
|
| Voltage |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
| FAN |
- Total of five fan headers supporting up to 5 fans
- Five 4-pin fan headers
- 5x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- CPU / System Overheat LED
- +5V Standby alert LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
| |
| RoHS |
- RoHS Compliant 6/6, Pb Free
|
| Environmental Spec. |
- Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
Серверное оборудование
