|
SYS-1017GR-TF-FM275 |
- SuperServer 1017GR-TF-FM275 (Black)
|
|
|
Super X9SRG-F |
|
|
CPU |
- Intel® Xeon® processor E5-2600 family (up to 8 cores and up to 130W)
- Single Socket R (LGA 2011)
|
Cache |
|
System Bus |
|
GPU |
- supports M2075, up to 130W CPU at 35°C
|
|
|
Memory Capacity |
- 8x 240-pin DDR3 DIMM sockets
- Supports up to 256 GB DDR3 ECC Registered memory (RDIMM)
|
Memory Type |
- 1600/1333/1066MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes |
- 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors
(using ECC memory)
|
|
|
GPU |
- 2x NVIDIA Tesla M2075 Fermi GPU cards
|
Chipset |
|
SATA |
- Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Renesas SH7757 BMC
|
Network Controllers |
- Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100GBASE-TX, and 1000BASE-T, RJ45 output
|
Graphics |
|
Super I/O |
|
|
|
SATA |
- 2 SATA 3.0 ports (6Gbps)
- 4 SATA 2.0 ports (3Gbps)
|
LAN |
- 2 RJ45 Gigabit Ethernet LAN ports
- 1 RJ45 Dedicated IPMI LAN port
|
USB |
- 6 USB 2.0 ports total
(2 rear + 4 via headers)
|
Video |
|
Keyboard/Mouse |
- 1 PS/2 Keyboard/Mouse port
|
Serial Port |
|
DOM |
- 1 DOM (Disk on Module) power connector
|
|
|
BIOS Type |
- 64Mb SPI Flash EEPROM with AMI® BIOS
|
BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.3
- UEFI
- RTC (Real Time Clock) Wakeup
|
|
|
|
|
Form Factor |
|
Model |
|
|
|
Height |
|
Width |
|
Depth |
|
Gross Weight |
|
Available Color |
|
|
|
Buttons |
- Power On/Off button
- System Reset button
|
LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED / Fan fail LED /
UID LED
|
|
|
PCI-Express |
- 2 (x16) PCI-E 3.0 slots (2x NVIDIA Tesla M2075 Fermi GPU cards integrated)
- 1 (x8) PCI-E 3.0 slot for I.B. card
|
|
|
Hot-swap |
- 6x 2.5" Hot-swap drive bays
|
|
|
|
Fans |
- 8x counter-rotating fans with optimal fan speed control
|
|
|
Redundant 1400W High-efficiency AC power supply with Digital Switching Control & PMBus 1.2 |
AC Voltage |
- 100-240 V, 50-60 Hz, 15 Amp max
|
+5V standby |
|
+12V |
- 100 Amp/115 Vac
- 117 Amp/230 Vac
|
Certification |
80PLUS Platinum
(Cert. in progress) |
|
|
CPU |
- Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
- CPU Core 5-Phase-switching voltage regulator
|
FAN |
- Total of eight 4-pin PWM fans
- 8x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
LED |
- Power Fail / Overheat LED
- Suspend-state Indicator LED
- UID LED
|
Other Features |
|
|
|
RoHS |
|
Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|