SBi-7426T-T3 DatacenterBlade Module Nehalem-EP
 |
| SBI-7426T-T3 |
- Processor Blade SBI-7426T-T3 (Black)
|
| |
|
Super B8DTE |
| |
|
| CPU |
- Dual 1366-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Intel® Xeon® Processor X5600/E5600/L5600 Series
(Westmere) 40W - 95W
- Intel® Xeon® Processor X5500/E5500/L5500 Series
(Nehalem-EP) 38W - 95W
|
| QPI |
|
| |
|
| Memory Capacity |
- 12x 240-pin DIMM sockets
- Supports up to 96 GB VLP 1333 / 1066 / 800MHz DDR3 ECC Registered memory
- Supports up to 24 GB VLP 1333 / 1066 / 800MHz DDR3 ECC Unbuffered memory
- Memory Mirroring supported
|
| Memory Type |
- 1333 / 1066 / 800MHz VLP ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
| |
NOTE: 14-Blade can only use VLP (Very Low Profile) memory module. |
| |
|
| Chipset |
- Intel® 5500 (Tylersburg) chipset
- ICH10R + IOH-24D
|
| InfiniBand Support |
- 4x DDR (20Gb/s) InfiniBand mezzanine HCA (Optional)
|
| SATA |
- Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support (Windows)
- RAID 0, 1, 10 support (Linux)
|
| IPMI |
- Support for Intelligent Platform Management Interface (IPMI) v.2.0 via Chassis Management Module (CMM)
|
| Network Controllers |
- Intel® 82576 Dual-Port Gigabit Ethernet
- Intel® I/OAT 3 support for fast, scaleable, and reliable networking
- VMDq support for better performance of virtualization
|
| Super I/O |
|
| Clock Generator |
|
| |
|
| BIOS Type |
- 32Mb SPI Flash EEPROM with AMI® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
|
 |
|
|
| Height |
|
| Width |
|
| Depth |
|
| Weight |
|
| Available Colors |
|
| |
|
| Buttons |
- Power On/Off button
- KVM button
|
| LEDs |
- Power LED
- UID / KVM LED
- Network Activity LED
- Fault LED
|
| Connector |
- SUV (Serial/USB/Video) & KVM Connector
|
| |
|
| Hot-swap |
- 3x 2.5" SATA Hot-swap drive bays
|
| |
|
| KVM |
- 1 Front Connector for Supermicro KVM Card
|
| |
| Environmental Spec. |
- Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
| |
| United States / Canada |
- FCC- Emissions (US) Verification
|
| Europe |
- EN55022 - Emissions
- EN55024 - Immunity
- EN61000-3-2 - Harmonics
- EN61000-3-3 - Voltage Flicker
- CE - EMC Directive 89/336/EEC
|
| |
| United States / Canada |
- UL60950-1 - CSA/CUL 60950-1
|
| Europe |
- EN60950-1, CE - Low Voltage Directive 73/23/EEE
|
| Germany |
|
|
|
|
|
|
|
|
| |
Part Number |
Qty |
Description |
| Motherboard / Chassis |
MBD-B8DTE-O-P
CSE-714M-230B |
1
1 |
Super B8DTE Motherboard
Black Front Blade Chassis (B = Black) |
| Hard Drive Tray |
MCP-220-00047-0B |
3 |
Black 2.5" Hard Drive Tray |
| Front Panel Control |
MCP-280-KVM1 |
1 |
Power & KVM buttons, LED, KVM connector |
|
|
|
|
|
| |
Part Number |
Qty |
Description |
| Heatsink / Retention |
SNK-P0033P |
2 |
Heatsink for Intel CPU |
| Networking |
AOC-XEH-iN2
AOC-IBH-XDD
AOC-IBH-XQD
AOC-IBH-XQS
AOC-IBH-XDS
|
1 1
1
1
1 |
Dual Port 10G Ethernet AOC for Blade
InfiniBand Dual-Port 4x DDR 20Gbps Mezzanine HCA
(Mellanox ConnectX chip)InfiniBand Dual-Port 4x QDR 40Gbps Mezzanine HCA
(Mellanox ConnectX-2 chip) InfiniBand Single port 4x QDR 40Gbps Mezzanine HCA
(Mellanox ConnectX chip)InfiniBand Single port 4x DDR 20Gbps Mezzanine HCA
(Mellanox ConnectX chip) |
|
|
.png "VK"){kind=small}
