Mother Board Supermicro MBD-H8QIi-F-O; Proprietary, 4 CPU,AMD SR5690 + SP5100, до 128 GB, , 6x SATA
 |
| MBD-H8QIi-F-O |
- H8QIi-F (Standard Retail Pack)
|
| MBD-H8QIi-F-B |
|
| |
|
| Form Factor |
|
| Dimensions |
- 16.4" x 13" (41.7cm x 33.0cm)
|
| |
|
| CPU |
- Quad 1207-pin Socket F
- Supports up to four Six-Core / Quad-Core AMD Opteron™ 8000 Series processors**
- HT3.0 Link support
|
| Chipset |
- Dual AMD SR5690 + SP5100 Chipset
|
| |
|
| Memory Capacity |
- Sixteen 240-pin DIMM sockets
- Support up to 128GB memory
- Dual channel memory bus; Single or Dual (recommended) channel memory support
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
|
| Memory Type |
- DDR2 800/667/533 MHz Registered ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256 MB, 512 MB, 1GB, 2GB, 4GB, 8GB
|
| Memory Voltage |
|
| |
|
| SATA |
- AMD SP5100 (RAID 0, 1, 10)
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Winbond® WPCM450 BMC
|
| Network Controllers |
- Intel® 82576 controller, Dual-Port
Gigabit Ethernet
- 10/100/1000BASE-T support
|
| VGA |
- Matrox G200eW 16MB DDR2 graphics
|
| Super I/O |
|
| |
|
| SATA |
|
| IDE |
- Single EIDE channel support up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100/133
|
| LAN |
- 2 RJ45 LAN ports
- 1 RJ45 Dedicated LAN supports IPMI
|
| USB |
- 6x USB 2.0 ports
- 2x Rear / 2x header / 2x type A
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 1x Fast UART 16550 serial port
- 1x serial port header
|
| |
|
| PCI-Express |
- 3x PCI-e 2.0 x16
- 1x PCI-e 2.0 x8
- 2x PCI-e 2.0 x4 (in x8 slot)
- 1x UIO slot
|
|
 |
|
|
| 2U Chassis |
|
| Tower / 4U Rackmount |
|
| |
|
| BIOS Type |
- 16Mb SPI Flash ROM with AMI® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
|
| |
|
| Software |
- IPMI (Intelligent Platform Management Interface) 2.0
- Super
 Doctor III
|
| Power Configurations |
- ACPI Power Management
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from Soft-Off
- Power-on mode control for AC power loss recovery
|
| |
|
| CPU |
- Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, VBAT, HT, memory, chipset
- CPU switching voltage regulator
|
| FAN |
- Up to 9-fan status tachometer monitoring
- Up to nine 4-pin fan headers
- Status monitor for speed control
- 3-pin fan support (w/o speed control)
- Low noise fan speed control
(4-pin fan only)
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- I2C Temperature Sensing Logic
|
| LED |
- CPU / System Overheat LED
- +5V Standby Alert LED
|
| Other Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
|
| |
|
| RoHS |
- RoHS Compliant 5/6, Server Exemption
|
| Environmental Specifications |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
| |
|
| • Please see our OS Compatibility Chart |
| |
|
| FCC |
- Passed to meet FCC standard requirement
|
|
|
 |
|
|
|
|
|
| |
Part Number |
Qty |
Description |
| H8QIi-F |
MBD-H8QIi-F -O |
1 |
H8QIi-F Motherboard |
| Retention |
BKT-0012L |
4 |
RETENTION MODULE FOR AMD CPU SOCKET F,ROHS |
| I/O Cable 1 |
CBL-0044L |
6 |
57.5CM SATA FLAT S-S PBF |
| I/O Cable 2 |
CBL-010L |
1 |
9 PIN SERIAL PORT DTK CABLE, LF |
| I/O Cable 3 |
CBL-036L-03 |
1 |
18" ATA 133/100/66 3-DROP TPE CABLE, PBF |
| Driver Disk |
CDR-APLUS2 |
1 |
DRIVER CD FOR AMD SP5100 CHIPSET MB |
| I/O Shield |
MCP-260-00027-0N |
1 |
STD I/O SHIELD FOR X8, H8, X7SB3 SERVER MB (3RD LAN + 4XLAN) |
|
|
Серверное оборудование
Doctor III
.png "VK"){kind=small}
