|
|
X7SBi-O
Есть вопрос по товару?
Цена: 35110 руб
Mother Board Supermicro MBD-X7SBi-O; ATX, 1 CPU,Intel 3210, до 8 GB, 6x SATA Intel ICH9R,IPMI, 2x G-
 |
| MBD-X7SBi -O |
- X7SBi (Standard Retail Pack)
|
| MBD-X7SBi -B |
|
| |
|
| Form Factor |
|
| Dimensions |
- 12" x 9.6 ", (30.48cm x 24.38 cm)
|
| |
|
| CPU |
- Single LGA775 ZIF Socket
- Supports Quad-Core Intel® Xeon® X3300/X3200 series
- Supports Dual-Core Intel® Xeon® E3100/3000 series
- Supports Intel® Xeon® processor L3360 and L3110 series
- Supports Intel® Core™2 Quad Q9000/Q8000/Q6000 series
- Supports Intel® Core™2 Duo E8000/E7000/E6000/E4000 series
- Supports Intel® Pentium® E5000/E2000 series
- Supports Intel® Celeron® E1000 and 400 series
- NOTE: Intel Xeon processor L3014 requires an LGA771 socket and is not supported.
|
| System Bus |
- 1333 / 1066 / 800 MHz system bus
|
| |
|
| Memory Capacity |
- Four 240-pin DIMM sockets
- Supports up to 8 GB of memory (Dual Channel)
|
| Memory Type |
- DDR2 800/667MHz unbuffered ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256 MB, 512 MB, 1 GB, 2GB, 4GB
|
| Memory Voltage |
|
| |
|
| Chipset |
- Intel 3210 chipset
- ICH9R + PXH + Intel® 82573V + Intel® 82573L
|
| Serial ATA |
- Intel® ICH9R SATA2 (3 Gbps) controller built-in
- RAID 0, 1, 5, 10 support (Windows Only)
- RAID 0, 1, 10 support (Linux)
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN & optional KVM-over-LAN support
- SIMSO Slot - Supermicro Intelligement Management
- (Optional: AOC-SIMSO-HTC, AOC-SIMSO+)
- NOTE: AOC-SIMSO+ must use Dedicated LAN for KVM-over-LAN function
|
| Network Controllers |
- 2x Single-port Gigabit PCI-Express Ethernet Controllers
- Intel® 82573V + Intel® 82573L
- Supports 10BASE-T, 100BASE-T, 1000BASE-T, RJ45 output
|
| VGA |
- On-board ATI ES1000 (32MB) graphics
|
| Super I/O |
|
| Clock Generator |
|
| |
|
| Serial ATA |
- Six Serial ATA ports (3 Gbps performance)
- Six SATA hard drives supported
|
| IDE |
- One EIDE channel supports up to two UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy |
- 1 Floppy controller; 1.44 MB
|
| LAN |
|
| USB |
- Up to 8x USB 2.0 / 1.1 compliant ports
- 2 rear ports
- 2 internal headers + 2 on-board
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 1x Fast UART 16550 serial port
- 1x internal header
|
| Parallel Port |
- 1x ECP / EEP Parallel Header
|
|
 |
|
|
| 1U Chassis |
- CSE-512-200B
- CSE-512C-260
- CSE-512F-260
- CSE-512L-260
- CSE-513F-260
|
| Mid-Tower |
- CSE-733E-465B
- CSE-733i-465B
- CSE-733T-465B
- CSE-733TQ-465B
|
| Tower / 4U Rackmount |
|
| |
|
| PCI-Express |
- 1 Universal (x8) PCI-e slot
|
| PCI-X |
- 1 64 bit PCI-X 133 Mhz slot
|
| PCI |
|
| |
|
| BIOS Type |
- 16Mb Flash EEPROM with Phoenix BIOS®
|
| BIOS Features |
- Plug and Play (PnP)
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0/2.0
- SMBIOS 2.3
- USB Keyboard support
|
| |
|
| Software |
- Optional IPMI 1.5/2.0
- SuperDoctor® III
- Watch Dog
- NMI
- W83793G Rev G
|
| Power Configurations |
- ACPI Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from Soft-Off
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
- Suspend to RAM(STR)
|
| |
|
| Voltage |
- Monitors for CPU Cores ( +1.8V, +3.3V, +5, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset)
- CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.3750V-1.6000V
- Adjustable CPU clock frequency ratio (Only available if CPU is supported)
|
| FAN |
- Total of six 4-pin fan headers
- 6x fans with tachometer monitoring
- Status monitor with firmware / software speed control
- Status monitor for on/off control
- Support 3-pin fans (without speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connector
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip support
- Thermal Monitor (TM2) Support
- PECI
|
| LED |
- CPU / System Overheat LED
- +5 Standby alert LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
| |
|
| RoHS |
- RoHS Compliant 6/6, Pb Free
|
| Environmental Spec. |
- Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
| |
|
• Please see our OS Compatibility Chart |
|
|
 |
|
|
|
|
|
| |
Part Number |
Qty |
Description |
| X7SBi |
MBD-X7SBi -O |
1 |
X7SBi Motherboard |
| Manual(s) |
MNL-0954 |
1 |
Motherboard Manual for X7SBi |
| I/O Cables |
CBL-0022L
CBL-0044L
CBL-0036L-03 |
1
41 |
Floppy Cable
SATA Cable (2Ft.)ATA 66/100 IDE LP Cable |
| Driver Disk |
CDR-X7-UP |
1 |
Version 1.00 (or newer) CD |
| I/O Shield |
CSE-PT07L |
1 |
I/O Shield for X7SBi |
|
|
|
|
| |
Part Number |
Qty |
Description |
| Heat Sink |
SNK-P0016 |
- |
1U, Passive Heatsink for LGA775 Socket |
| Riser Card |
CSE-RR1U-Xi
CSE-RR1U-ELi |
-
- |
1U 64-bit PCI-X Riser Card for X7SBi
1U PCI-E x8 Riser Card for X7SBi |
|
|
|
Серверное оборудование
.png "VK"){kind=small}
