|
MBD-X8QBE-F -O |
- X8QBE-F (Standard Retail Pack)
|
MBD-X8QBE-F -B |
|
|
|
Form Factor |
|
Dimensions |
- 16.4" x 16.8" (41.66cm x 42.65cm)
|
|
|
CPU |
- Quad 1567-pin LGA Sockets
- Supports up to four Intel® Xeon® 64-bit processor(s) of the same type below:
- Intel® Xeon® processors 7500 series (8-core, codename Nehalem-EX) and new generation Intel® Xeon® processors E7-4800 family (10-core, codename Westmere-EX)
|
QPI |
|
|
|
Memory Capacity |
- 32x 240-pin DIMM sockets
- Supports up to 1024 GB 1066 / 978 / 800MHz DDR3 ECC Registered memory
- Memory Mirroring supported
|
Memory Type |
- 1333* / 1066 / 978 / 800MHz ECC Registered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes |
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
|
|
Chipset |
- Intel® 7500 (Boxboro-EX) chipset
- ICH10R
|
SATA |
- Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support (Windows)
- RAID 0, 1, 10 support (Linux)
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Winbond® WPCM450 BMC
|
Network Controllers |
- Intel® 82576 Dual-Port Gigabit Ethernet Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
Graphics |
|
Super I/O |
|
|
|
Serial ATA |
- Six Serial ATA ports
- Six SATA hard drives supported
|
LAN |
|
USB |
- 2x USB rear ports
- 2x USB internal headers (3 ports)
- Total 5 USB 2.0 Compliant
|
VGA |
|
Serial Port / Header |
- 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header
|
|
|
|
|
1U Chassis |
|
2U Chassis |
|
Tower / 4U Rackmount |
|
Important Chassis Notes |
- To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details.
|
|
|
PCI-Express |
- 2 (x16) PCI-E 2.0 or 1 (x16) PCI-E 2.0 + 2 (x8) PCI-E 2.0 or 4 (x8) PCI-E 2.0 slots
|
|
|
BIOS Type |
- 32Mb SPI Flash EEPROM with AMI® BIOS
|
BIOS Features |
- Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
|
|
Software |
- IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
- SuperDoctor® III
|
Power Configurations |
- ACPI / ACPM Power Management
|
|
|
Voltage |
- Monitors for CPU Cores, +1.2V, 1.5V, +3.3V, +12V, (+3V, 1.0V, 1.2V, 1.8V, 1.1V) Standby, VBAT, Memory, Chipset Voltages.
- 4-Phase-switching voltage regulator with auto-sense from 0.6V-1.35V
|
FAN |
- Total of 10 fan headers supporting up to 10 fans
- Ten 4-pin fan headers
- 10x fans with tachometer status monitoring
- Support 4-pin fans (w/o speed control)
- Low noise fan speed control
|
Temperature |
- Monitoring for CPU and chassis environment
- Thermal Control for 8x fan connectors
- PECI
|
Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
|
|
RoHS |
- RoHS Compliant 6/6, Pb Free
|
Environmental Spec. |
- Operating Temperature: 10° to 35° C (50° to 95°F)
- Non-operating Temperature: -40° to 70° C (-40° to 158° F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|