Mother Board Supermicro MBD-X9SCL-F-O; Micro ATX, 1 CPU,Intel C202, до 32 GB, 6x SATA Intel PCH Driv
 |
| MBD-X9SCL+-F -B |
|
| |
|
| Form Factor |
|
| Dimensions |
- 9.6" x 9.6", (24.4cm x 24.4 cm)
|
| |
|
| CPU |
- Intel® Xeon® processor E3-1200 & v2 series, Intel® 2nd Gen Core i3 processors *** *
- Socket H2 (LGA 1155)
|
| |
|
| Memory Capacity |
- 4x 240-pin DDR3 DIMM sockets
- Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
|
| Memory Type |
- 1333/1600MHz*** ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
|
| Chipset |
|
| SATA |
- 6x SATA2 (3Gbps) w/ RAID 0, 1, 5, 10
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
| Network Controllers |
- Two Intel® 82574L Gigabit Ethernet Controllers
- Virtual Machine Device Queues High efficient I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| VGA |
|
| Super I/O |
|
| |
|
| Serial ATA |
- 6 SATA 2.0 ports
- 6 SATA hard drives supported
|
| LAN |
- 2x Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
- 9x USB 2.0 ports total
(2x rear + 6x via header + 1x type A)
|
| VGA |
|
| Serial Port / Header |
- 2x Fast UART 16550 serial port
(one header and one rear port)
|
|
 |
|
| PCI-Express |
- 2 (x8) PCI-E 3.0 in x8 slots***
- 1 (x4) PCI-E 2.0 in x8 slots
|
| |
|
| BIOS Type |
- 32Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
| |
|
| Software |
- IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
- SuperDoctor® III
- Watch Dog
- NMI
|
| Power Configurations |
- ACPI / ACPM Power Management
- Main Switch Override Mechanism
- Power-on mode for AC power recovery
- Internal/External modem ring-on
|
| |
|
| Voltage |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
| FAN |
- Total of 5 fan headers supporting up to 5 fans
- Five 4-pin fan headers
- 5x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- CPU / System Overheat LED
- +5V Standby alert LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
| |
|
• Please see our OS Compatibility Chart |
|
|
 |
|
|
|
|
|
| |
Part Number |
Qty |
Description |
| X9SCL+-F |
MBD-X9SCL+-F |
1 |
X9SCL+-F Motherboard |
| I/O Cables |
CBL-0044L |
6 |
57.5CM SATA FLAT S-S PBF |
| Driver Disk |
CDR-X9-UP |
1 |
Driver Disk |
| I/O Shield |
MCP-260-00027-0N |
1 |
STD I/O SHIELD |
|
* Per Intel's spec, for platforms using C202/C204 PCH:
1) Intel i5/i7 CPUs are not supported
2) Intel E3-12x5 series processors which have integrated graphics support are not recommended.
** Supermicro X9SCL-F motherboard is using a dedicated graphic from Matrox G200eW.
*** BIOS rev. 2.0 or above is needed to support new E3-1200 v2 CPUs, which supports PCI-E 3.0 & DDR3 1600. |
Серверное оборудование
.png "VK"){kind=small}
